Washer & Dryer Repair

washing machine

CALL TODAY:
(317) 245-3272

When your washer breaks down or dryer the dryer does not work, don’t end up with piles of dirty clothes. And, don’t spend your time doing the clothes by hand and air drying them. Call an appliance repair service. If you want a competent and affordable repair company in this area, call Choice Carmel Appliance Repair. We are always happy to provide same-day service.

Our local, certified technicians have the experience, training, and tools to do all types of repairs during their first service visit. We stock up our vans with the tools and the manufacturer parts for all the major washers and dryers including GE, Goodman, LG, Kenmore, Bryant, Carrier, Sears, Armstrong, Lennox, RCA and more!

WASHER PROBLEMS

LOUD/CONSISTENT NOISES

A loud washer noise is the most frequent reason why we get calls to check out this machine. We can check it out and find the location of the noise and then find out if we can repair it or need to replace the damaged parts. The reason for the noise is most often a broken pump motor or maybe a worn belt. Damaged bearings are also common culprits.

WON’T TURN ON/AGITATE

Make sure that a washer that does not turn on is plugged in. And check the circuit breaker, just in case. When we get called for this problem we find broken door latches, damaged timers or burned out thermal fuses. If the washer turns on but does not agitate we end up repairing or replacing agitator cogs, broken couplers, damaged transmissions, or a worn out drive belt.

WON’T SPIN

When a washer does not spin it has is a problem with the wax motor, motor coupling, or door latch. We can repair these problems on a short visit and get your washing machine spinning again with a quick, same-day service visit.

OVERFLOWS 

If your washer overflows, there is a damaged air dome tube, water level pressure switch, or water inlet valve. Call us to fix this problem on the same day.

NO HOT/COLD WATER

A broken inlet hose or damaged temperature control switch are the two likely reasons why your washing machine does not produce cold or hot water.

DRYER PROBLEMS

LOUD/CONSTANT NOISES

The most common problem we check out for dryers is loud noises. The noises are usually the result of a bad seal, a worn belt, or broken bearings. Call us to check out an fix the noise before it leads a machine that does not work at all.

NO HEAT/WON’T DRY

When your dryer does not produce sufficient heat, the problem is most often a broken high limit thermostat, cycling thermostat, or heating element. The same parts can cause a dryer to be too hot as well. Our technician will inspect your washer to diagnose the problem and fix it.

WON’T TURN ON/TUMBLE

The first thing to do when your dryer does not start to make sure the circuit breaker is not off and that the appliance is plugged in. The second thing is to call us for same-day repairs. The damaged parts that stop the dryer from turning on are cycling thermostats, high limit thermostats, and heating elements.

WON’T TURN OFF

On the other hand, a dryer that does not start has a broken door switch or timer. Call us for quick, same-day repairs.

TIMER WON’T ADVANCE

The dryer timer needs to advance so that its cycle is complete. When the timer doesn’t advance, there is usually trouble with the timer motor or with the cycling thermostat.

CLICK-TO-CALL